Send IR commands over TCP/IP network

IR Over IP

Keene Electronics released its new product – IR Anywhere. It allows to send IR signals over TCP/IP network. Even through Internet! IR Anywhere contains two physically identical modules. Each of them can act as either a receiver, as a target or as a stand alone.
A receiver will receive an IR command, convert it to packet data and send that data to a pre-determined IP address (usually another module). A target module will decode the received data and retransmit the IR as originally received. A stand alone module will operate as a target receiver without attempting to locate a compatible PC or other module on the local network.

The IR Anywhere can be very useful for multi-room A/V distribution systems. It seems ideal to transmit IR commands from one room to another. But if you’d like to control A/V equipment from some IP-based home automation system the better solution is GC100.

[via AutomatedHome]

Related Posts:

  • HTPC case producers
  • Linux MCE compatable X10 components
  • Z-Wave Converges with TCP/IP
  • MyTVPal.com – North America’s first 1080P High Definition IPTV Service
  • Howto add support of new device in Plutohome
  • Howto adapt Debian packages for Nokia770

  • Write a comment: