Configure Asterisk with LinuxMCE

Asterisk

On the LinuxMCE is posted a new brief howto about configuration of Asterisk SIP trunk. I did the same but for private SIP provider under Plutohome. Since LinuxMCE was forked from Plutohome project that approach should work for both.

For configuring SIP trunk in my Pluthome installation I used that article. It describes clearly how to do that. Moreover, its author used AMP the same as in Plutohome.

Based on my experience with configuration of SIP trunk under Plutohome I wrote that brief howto. Hope it’ll help people.

Related Posts:

  • Configure SIP gate for Asterisk
  • Asterisk Voicemail for iPhone
  • Howto Build Plutohome Orbiter for Nokia770/N800/N810
  • Skype For Asterisk is out
  • Nokia770/N800 as a LinuxMCE IP phone
  • Using Nokia770/N800 as a Plutohome Orbiter

  • Write a comment: