Howto re-install Plutohome start scripts

Once I had a problem with my Plutohome installation. After setup a new Media Director all Pluto startup scripts disappeared from /etc/init.d. I didn’t have any special things in this installation. So, I decided to install Plutohome from the beginning. But later I found a simple way to recover the startup scripts. Here is a receipt:

  1. Write in /etc/apt/sources.list:
    deb http://deb.plutohome.com/debian/ 20dev main
  2. Run:
    apt-get update
    apt-get install pluto-install-scripts
    /usr/pluto/install/Initial_Config.sh
  3. Follow by installer

This solution can save your time and customizations.

Related Posts:

  • Configure iMON PAD/VFD in LinuxMCE
  • Configure iMON PAD/VFD in LinuxMCE
  • Howto adapt Debian packages for Nokia770
  • Howto Build Plutohome Orbiter for Nokia770/N800/N810
  • Mac Mini as Plutohome MD: part II
  • Prepare VDR LiveTV for limited bandwidth howto

  • Write a comment:

    Howto re-install Plutohome start scripts

    Once I had a problem with my Plutohome installation. After setup a new Media Director all Pluto startup scripts disappeared from /etc/init.d. I didn’t have any special things in this installation. So, I decided to install Plutohome from the beginning. But later I found a simple way to recover the startup scripts. Here is a receipt:

    1. Write in /etc/apt/sources.list:
      deb http://deb.plutohome.com/debian/ 20dev main
    2. Run:
      apt-get update
      apt-get install pluto-install-scripts
      /usr/pluto/install/Initial_Config.sh
    3. Follow by installer

    This solution can save your time and customizations.

    Related Posts:

  • Configure iMON PAD/VFD in LinuxMCE
  • Configure iMON PAD/VFD in LinuxMCE
  • Howto adapt Debian packages for Nokia770
  • Howto Build Plutohome Orbiter for Nokia770/N800/N810
  • Mac Mini as Plutohome MD: part II
  • Prepare VDR LiveTV for limited bandwidth howto

  • Write a comment: