Comments on: Testing ASUS P2-M2A690G as LinuxMCE media director http://smart-home-blog.com/archives/1036 Welcome to Home 2.0! This blog is about home automation techologies, digital TV, VDR, gadgets, Plutohome, HD TV Fri, 12 Mar 2010 09:56:57 +0000 http://wordpress.org/?v=2.9.2 hourly 1 By: Bemfica http://smart-home-blog.com/archives/1036/comment-page-1#comment-24536 Bemfica Wed, 18 Feb 2009 00:10:44 +0000 http://smart-home-blog.com/?p=1036#comment-24536 Hi Michael, I did what you had asked me, but it still get the same error. If I'm not asking you to much, can you write down step by step, what I have to do??? I'll really appreciate it. Thank you very much Hi Michael,

I did what you had asked me, but it still get the same error.
If I’m not asking you to much, can you write down step by step, what I have to do???
I’ll really appreciate it.

Thank you very much

]]> By: Michael Stepanov http://smart-home-blog.com/archives/1036/comment-page-1#comment-24503 Michael Stepanov Tue, 17 Feb 2009 15:57:19 +0000 http://smart-home-blog.com/?p=1036#comment-24503 Bemfica, I suspect you forgot to do <a href="http://wiki.linuxmce.org/index.php/Unrecognized_NIC" rel="nofollow">modifications</a> to load proper module for the NIC. Just do that and try again. Bemfica, I suspect you forgot to do modifications to load proper module for the NIC. Just do that and try again.

]]> By: Bemfica http://smart-home-blog.com/archives/1036/comment-page-1#comment-24467 Bemfica Tue, 17 Feb 2009 07:29:52 +0000 http://smart-home-blog.com/?p=1036#comment-24467 Hi Michael, I have followed your advice too and bought this buy to become a MD. So, let me tell you the sequence that I did: * I've using this barebone with a amd athlon 64x2 5200 1st - I added manually the MD from the Web Admin 2nd - put the mac address and did the update (clicking on the Update button on the bottom) 3rd - I clicked on the Diskless imagem button on the bottom 4th - boot the md, after that I get the following error when I try to boot: ipconfig: No Devices to configure /init: 1:Cant Open /tmp/net-eth0.conf Kernal Panic - Not Syncing: Attempted to Kill Init So, can you tell me the correct sequence that I have to follow?? Thanks Hi Michael,
I have followed your advice too and bought this buy to become a MD. So, let me tell you the sequence that I did:
* I’ve using this barebone with a amd athlon 64×2 5200

1st – I added manually the MD from the Web Admin
2nd – put the mac address and did the update (clicking on the Update button on the bottom)
3rd – I clicked on the Diskless imagem button on the bottom
4th – boot the md, after that I get the following error when I try to boot:

ipconfig: No Devices to configure
/init: 1:Cant Open /tmp/net-eth0.conf

Kernal Panic – Not Syncing: Attempted to Kill Init

So, can you tell me the correct sequence that I have to follow??
Thanks

]]> By: Dave http://smart-home-blog.com/archives/1036/comment-page-1#comment-23166 Dave Wed, 13 Aug 2008 13:06:58 +0000 http://smart-home-blog.com/?p=1036#comment-23166 Obviously dirver problems - I'm gonna check it again - maybe it works now Obviously dirver problems – I’m gonna check it again – maybe it works now

]]> By: Michael Stepanov http://smart-home-blog.com/archives/1036/comment-page-1#comment-23164 Michael Stepanov Mon, 11 Aug 2008 19:31:00 +0000 http://smart-home-blog.com/?p=1036#comment-23164 I use budget <a href="http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-CI_PCI" rel="nofollow">Hauppauge WinTV-NOVA-CI PCI </a>. It works like a charm :) What problem do you have with your card and what is model? I use budget Hauppauge WinTV-NOVA-CI PCI . It works like a charm :) What problem do you have with your card and what is model?

]]>